CCI-1000 Acrylic Sealer
CCI-1000 is a single component solvent borne, ACRYLIC sealer. It is designed to be used as a high performance solvent borne solution acrylic in clear masonry coating.
Product Features:
- Excellent hot tire resistance properties
- Fast dry and early water resistance
- Non-staining
- Excellent water and chemical resistance
- Excellent clarity and block resistance
- Excellent leveling, flow, and microform-free properties
- Excellent adhesion to variety of substrates
- Excellent UV resistance property
Typical Uses:
Clear sealer for concrete and masonry systems superior solvent based concrete flooring. Sealer for driveways, warehouses, garage flooring.
Technical Data:
| Colour: |
Clear |
| Resin Type: |
Acrylic-copolymer |
| Sheen: |
Gloss |
| Percent Solids : |
18 +/- 1%(Clear) |
| Theoretical Coverage : |
6 M2/ lit at 25 microns DFT
270ft2/US Gal @ 1Mil DFT |
| Drying Time @ 23°C (75°F): |
touch / recoat: 1/2 hrs / 2 hrs
light traffic: 3 hours |
| Reducer/Clean-up: |
xylene/toluene |
| Viscosity: |
45-50 KU at 23°C(75°F) |
| VOC: |
730 gr/lit |
| Specific Gravity: |
0.890 +/-0.005(gr/lit)
7.50 +/- 0.05 (lb/gal) |
Surface Preparation:
All surfaces to be coated must be free of dirt, oils, and any other contaminants that may prevent proper adhesion.
Hard, glossy, non-porous surfaces should be mechanically abraded before coating application to improve adhesion.
