CCI-400 Bond Coat & Broom Finish is a very versatile product. We have noticed that our customers are using this to create and repair a number of different Concrete and Masonry applications.
In this post we will look at some the different ways CCI-400 Bond Coat & Broom Finish can help create the perfect finish for job or application.
We look forward to your comments on these examples. If you have any ideas you would like to share please send us a message and we will post it for you.
USING CCI-400 BOND COAT & BROOM FINISH AS A FINISH
In the pictures above you can see how CCI-400 Bond Coat & Broom Finish can be applied to an existing damaged concrete surface to create a clean long lasting finish. Specially formulated polymers in the mixture creates a strong bond between the existing and the new surface without the need for any additional adhesives or additives. Just add water to the dry powder and apply. As long as the surface is clean of any dirt, grease or oils and stable CCI-400 Bond Coat & Broom Finish will adhere. Using CCI-750 Cleaner will help to neutralize any acid built up on the existing surface prior to starting your job.
USING CCI-400 BOND COAT & BROOM FINISH AS MORTAR, THIN SET, OR ADHESIVE
Weather you are repairing an stone overlay installation or creating a new look on an existing cement staircase. CCI-400 Bond Coat & Broom Finish is the perfect ADHESIVE for the job. Once again there is no need for any additional admixtures to the product. Once you have a clean and stable surface CCI-400 Bond Coat & Broom Finish will create a solid bond between your existing Concrete surface and your new stonework.
USING CCI-400 BOND COAT & BROOM FINISH AS A BONDING LAYER
The BEST use of CCI-400 Bond Coat & Broom Finish is as a Bonding Layer to adhere a new surface to an old, worn, and damaged concrete installation. Weather it is a Warehouse, Store, or Basement. Use CCI-400 Bond Coat & Broom Finish to fill in any Cracks in the existing floor and then apply a very thin layer to the surface before adding your new finish. The new finish can be any of the CCI-400 Overlay products, CCI-400 Self Level Overlay, CCI-400 Stamp Mix, or CCI-400 Bond Coat & Broom Finish. This process further enhances the bond between old and new surfaces.