CCI-1000 is a single component solvent borne, acrylic sealer. It is designed to be used as a high performance solvent borne solution acrylic in clear masonry coating.
Product Features:
- Excellent hot tire resistance properties
- Fast dry and early water resistance
- Non-staining
- Excellent water and chemical resistance
- Excellent clarity and block resistance
- Excellent leveling, flow, and microform-free properties
- Excellent adhesion to variety of substrates
- Excellent UV resistance property
Typical Uses:
Clear sealer for concrete and masonry systems superior solvent based concrete flooring. Sealer for driveways, warehouses, garage flooring.
Technical Data:
Colour: | Clear |
---|---|
Resin Type: | Acrylic-copolymer |
Sheen: | Gloss |
Percent Solids : | 20 %(Clear) |
Theoretical Coverage : | 6 M2/ lit at 25 microns DFT 270ft2/US Gal @ 1Mil DFT |
Drying Time @ 23°C (75°F): | touch / recoat: 1/2 hrs / 2 hrs light traffic: 3 hours |
Reducer/Clean-up: | xylene/toluene |
Viscosity: | 45-50 KU at 23°C(75°F) |
VOC: | 100 gr/lit |
Specific Gravity: | 0.890 +/-0.005(gr/lit) 7.50 +/- 0.05 (lb/gal) |
Surface Preparation:
All surfaces to be coated must be free of dirt, oils, and any other contaminants that may prevent proper adhesion.
Hard, glossy, non-porous surfaces should be mechanically abraded before coating application to improve adhesion.